The Steel Company of Canada (Stelco) fonds [multiple media]
Notice descriptive – Brève1
The Steel Company of Canada (Stelco) fonds [multiple media]
- Niveau hiérarchique :
- Date :
- 1851-2005 (predominantly 1880-1970).
- Référence :
- Genre de documents :
- Dessins d'architecture et techniques, Art, Documents photographiques, Images en mouvement, Cartes et documents cartographiques, Objets (incluant les médailles et épinglettes), Documents sonores, Documents textuels
- Trouvé dans :
- Archives / Collections et fonds
- No d’identification :
- Contexte de cette notice :
Notice descriptive – Détails
- Fonds comprend :
80 description(s) de niveau inférieurVoir description(s) de niveau inférieur
- Date(s) :
- 1851-2005 (predominantly 1880-1970).
- Lieu de création :
- Étendue :
122.64 m of textual records.
119 microfilm reels.
ca. 20,237 photographs : 10,201 b&w and 166 col. prints; 7,895 b&w and 1,863 col. negatives; 3 snapshots; 31 cyanotypes; and 78 col. slides.
544 technical drawings.
73 architectural drawings.
39 objects : 2 screw eyes; 18 nails; 4 tinning rowels jack; 2 horse nails; 1 carriage bolg; 2 pail clasps; 2 roofing nails; 1 paper weight; 2 screws; 2 wires; 1 tire wire; 2 rods; 1 steel tape; 1 shears; 1 steel label.
7 prints : 2 b&w postcards; 3 posters.
6 videocassettes (1h) : VHS.
53 sound recordings (ca. 16h).
43 films reels (ca. 8h 15 min.).
1 medal : bronze ; 5 cm diameter.
1 album (20 photographs).
- Langue du document :
- Portée et contenu :
The Steel Company of Canada Limited's archives is an impressive archival fonds that fully documents the evolution of an industry in Canada. The records provide valuable insight into one important sector of the Canadian industry underrepresented in LAC's holdings, the steel and iron industry. The records help fill a significant gap in LAC's holdings coverage from the middle of the 19th century to the end of the 20th century. The steel and iron business that was carry out with the amalgamation of smaller Canadian companies in 1910 prospered during early twentieth and survived to the Great Depression of 1929.
The fonds comprises a large amount of textual records and multiple types of media records. The corporate, finance, accounting and personnel records when combined with the photographs, technical and architectural drawings offer an unparalleled view of the development of the steel and iron industry. The fonds affords a detailed history of the planning, construction and managing of company towns. More than just another resource extraction site, the largest one, Hamilton and its areas, were built and run as a company town surnamed the "Steel-Town".
The fonds is arranged in fifteen series and consists of records generated in the course of the daily business and activities of the company. They are as follows:
1. Founding companies
a. The Montreal Rolling Mill Company
b. The Hamilton Steel and Iron Company
c. The Canada Screw Company
d. The Dominion Wire Manufacturing Company
e. The Canada Bolt and Nut Company
2. Corporate, administrative and operational records
3. Financial and accounting records
4. Comptroller office
5. Engineering and metallurgical operations
6. Personnel and labour records
7. Land and properties records
8. Stelco plants photographs and related records
9. Iron ore and coal mining activities
10. Sales and marketing records
11. Traffic department
12. Subsidiaries and affiliated companies
13. Public relations records
15. Stelco's history and anniversaries
Types of records:
Cartographic, technical and architectural drawings:
The fonds consists of a large quantity of maps, technical and architectural drawings relating to all aspects of the planning, construction, operations and maintenance of the mills including those pertaining to its predecessors, subsidiaries and affiliated companies. They are an essential component of the fonds and Stelco engineers made them. They document every aspect of the company's operations over one century. The transformation and the production of both iron and steel in a same complex site required innovative engineering and metallurgical processes. These records provide useful information to study this industrial evolution and give an overview of the use and the management of the company's vast mining holdings developed in Ontario, in Quebec and in the United States. The maps and drawings are directly linked to textual records and they are described within the existing textual series. When large and fragile drawings were found into small folders, they were flattening and moved to proper folders for long-term preservation. A note informing researchers of this move is described in the finding aid.
Microfilms and microfiches:
The fonds also consists of 119 microfilm reels dated from ca. 1920 to 1969. In the 1960s, Stelco decided to preserve a copy of almost all of the Office of the President's correspondence and minutes of meetings. These records pertain to day-to-day activities of the office and cover all decisions made by Stelco officers on these subjects: various mills operations, properties, industrial relations, investments, mining, plant improvements, production, repairs and maintenance, labor relations, client customers, pensions, taxes, tariffs, exports and advertisings. The reels are arranged and numbered by subjects. Some originals of these records have not survived and we decided to preserve the reels as they were produced in the 1960s. They are complete and they could be digitized to improve the visual quality of records.
The 42 microfiches consist of copies of clippings published in the Globe and Mail, the Hamilton Spectator and the Financial Post shortly after Stelco launched its annual reports or after meeting with shareholders. A detailed description of each reel and microfiche is available in the finding aid.
The fonds also consists of photographs that record in detail the company's activities from the end of 19th century to the late 1970s. The oldest photographs that show groups of ironworkers inside of mills and officers are rare. At the occasion of its 25th, 40th, 50th and 75th company anniversaries, Stelco hired professional photographers to take photographs of its plants and facilities. Many have been used to promote its businesses and activities to customers. Among those valuables are the collection of panoramic and aerial photographs that show all Stelco plants in 1935 and 1950. They are remarkably well-preserved, providing exterior views of mills and entire towns, docks and canals. Others events were photographed each year such as Managers Sale Conferences, Staff Quarter century Clubs, Annual Picnics, Open Houses, Social Clubs and Sports Teams. Portraits of Stelco's Presidents or other officers are available. Photographs also pertain to the construction and subsequent development of Hamilton Works, McMaster Works and Lake Erie Works. These comprise albums of prints and negatives taken by Stelco's engineers and metallurgists and were included to their progress reports. The construction of new buildings, repairs and new equipment were recorded daily. During the 1950's, photographers and television producers became fascinated by the development of tremendous industrial facilities. Stelco's modern steelmaking mills were prime targets for artists. The company allowed producers and photographers walk into plants and take color shots of crews at work, making clips and interviews in the purpose of showing Canadian industrial progress on radio and on television. For instance, volume 601 contains a radio show album with 42 photographs that aired nightly on CKOC Hamilton broadcasting as well as staff from CKOC on site conducting interviews. Keith Lockhart hosted the nightly program.
The fonds has photographs of Stelco's products, which were taken for marketing and promotional activities. Many others have been published in the internal company magazine "Stelco Flashes". The main professional photographers who took images were: Anglinm-Norross Limited (1919), A. Art Gray and Co. of Toronto (1928) for sport activities, Card and Gillespie of Hamilton, Ontario (1937), Royal Studios (1937), Associated Screen News Limited of Montreal (1939), Associated Commercial Photographers Ltd. (1960), Cunningham of Hamilton, Ontario(1930-1940), Copeland-Chatterson Limited (1947), William Notman & Son Montreal (portraits) and Karsh (manager portraits), Lloyd Bloom of Hamilton, Ontario (1958), Carey Studios of Hamilton, Ontario (1960), Milne Studios Limited (1960), Matthews Photo Lab of Calgary (1963), Randolph Rhodes (1978), Bloom, Aggus and Dorchester Photographers of Hamilton (1953-1956), De Bruyn of Burlington, Ontario (1960), John Morris Studio of Hamilton, Ontario, (1970).
Stelco's employees such as John J. Carey (nickname Jack) well-known Hamilton photographer and filmmaker also took photographs. He joined Stelco in 1932 as a tester in the metallurgical laboratory and then became supervisor of metallurgical services. He was allowed to take pictures at various occasions and making films. In co-operation with Associated Screen Studies, he was responsible in 1958 for producing the 45-minute sound color film entitled "Steel for Canadians" which depicts operations within Canada's largest basic steelmaking plant of Hamilton (for more information, please read audiovisual finding aid). Today, some Stelco retirees collect photographs and souvenirs from the years they were working. They display pictures on the Web or on their own Facebook pages. Researchers may want to look at this virtual documentation to complete the research.
102 items of mudiovisual material are included in the fonds. These consist of 53 sound recordings, 43 films and 6 videos relating to the Stelco history. They have been used to chronicle its development and for marketing purposes. Stelco commercialization department used audiovisual material to promote its products. All events such as mill openings, exhibitions, anniversaries, conferences, visits, manager speeches, banquets, etc. were recorded by radio stations or by film producers with often the participation of Stelco employees. At the occasion of its 50th Stelco anniversary in 1960, Stelco hired Tom Farley from Crawley Films Inc. to produce a 16mm colored documentary. Entitled "Bright Century" the film traces the evolution and the use of steel and enhanced on Stelco's various steel production. The film was shown to customers at sales receptions throughout Canada. At the end of 1960s, the Stelco marketing division established an Audiovisual Centre within the Advertising and Sale Promotion Department under the supervision of S. J. Dunn. Equipped with the latest new audiovisual technology, the Centre was responsible to co-ordinate requirements for the use of Marketing Division. On a corporate-basic, audiovisual experts assisted Stelco departments for making slide presentations, motion picture films, script writings and video tape recordings. Available among them are: Stelco: A Portrait, A Time of Challenge, Steel goes Metric, Made to Measure, Les perspectives de l'acier, The Wabush Mines Story, Steel for the West, Stelform, Steel Bridge Design in Canada, Pipemaking at Stelco, Steel for the Nation, The Coilbox comes of Age and Stelco in the Future. In 1971, Stelco Audiovisual Centre expanded the use of videotape format to develop staff training programs for view throughout the company. Seminars were produced at Hamilton offices with a number of people taking part. Workers presented on tapes with their views or explanations. Tapes were then be shown across Stelco's plants in Canada with no need to transport the people involved. Read the finding aid for a detailed description of items.
The fonds also has some small artefacts. They were found in folders among the textual records. They consist of small screw eyes, samples of nails, horse nails, sample of carriage bolts, samples of pail clasps, samples of roofing nail most of them found the Montreal Rolling Mill Co. folders. One 3-dimensional weight paper made in glass with inscription "Canada Screw" dated around 1900 is also available. The Series Engineering and Metallurgical Records contain tire wire bead experimental rods coming from A.B. Dove's working papers (volume 682 file 7). Volume 148 files 1 and 2 contains metal screw pertaining to P.L. Robertson Patent (1909-1910). In volume 545, there is a sample of steel tape and shears used by Stelco President to open the Stelco Research and Development Center in 1967.
Art and other graphic material:
There is only a small amount of art and graphic material in the fonds. Included among the items are: a cartoon illustrating all Stelco managers at the 1925 Annual Dinner Meeting (volume 784), some handmade drawings produced for the 35th company anniversary publication (vols. 274-278) and posters (vols. 353, 441).
The fonds contain one medal produced by the artist Dora de Pédery-Hunt in 1974. This medal was given to an employee of Stelco at a retirement event in 1974. The medal shows the Celia Franca profile.
- Provenance :
- Biographie/Histoire administrative :
Steel Company of Canada : Stelco Inc. was formed in 1910 as The Steel Company of Canada Limited. The company was incorporated under Dominion charter, June 8, 1910 to take over the businesses of five smaller companies located in the Provinces of Quebec and Ontario: The Montreal Rolling Mills Co., The Hamilton Steel and Iron Co., The Canada Screw Co., The Dominion Wire Manufacturing Co, and The Canada Bolt and Nut Co. Max Aitken (Lord Beaverbrook) had been primary responsible for the merger that became The Steel Company of Canada Limited by accumulating financial investments. The beginning of the 20th Century was an era of a company amalgamation movement in Canada. Stelco manufactured numerous steel and iron products in common use, such as pig iron, bar iron, forgings, axles, spikes, bolts, nuts, rivets, tacks, screws, horseshoes and wire of all kinds. The merger allowed usual economies under one control management including a saving in the cost of administration, economies in the purchase of supplies and materials with a reduction in expenses of the sales force and distribution. Better facilities through the greater possibilities for specialized manufacture in each individual plant would also provide to the new company, the possibilities of taking full advantage of the improvements in steelmaking technology. At that time, steelmaking in North America was a very slow and costly process. The iron and steel products imported from Europe such as rails were not adapted to a climate extreme. The development of railways created a market for rails, spikes and fasteners. The first steel framed buildings were railway stations and hotels. Steel also was needed to build bridges and canals. The settlement of the West around 1900 and the development of agriculture provided a major market to the steel industry. Company Growth 1910-1940: The company made progressive growth after the amalgamation. The most important consequence of that growth was the imposition of duty on imported pig iron by the Dominion Government, and a bonus provided to companies per ton for iron made in Canada. The improvement in the construction of Blast and Open-Hearth furnaces and the purchase of new forgings equipment allowed The Steel Company of Canada to increase its production by 146,000 Net Tons of steel processed. Around 1913, the company had certain difficulties in securing ore and coal supplies. This condition was remedied by the acquisition of a large area of ore land in the United States, mainly near Lake Superior. Close to transportation and navigation facilities, these mines ensured an adequate ore source of supply for many years at favorable cost. The construction of Welland and Lachine Canals as part of the vast St. Lawrence River navigation systems would help lower manufacturing production costs to the benefit of all population in Provinces and encourage the development of domestic trade. In 1914, The Great War began and created a tremendous demand for steel, especially in the manufacture of shell casings. Stelco built its first sheet mill in 1917 and a new by-product coke oven in 1918. Later that year, a benzol and by-product plant was added to take advantage of the coke ovens by-products. A pig-casting machine replaced the old method of sand-casting pig iron at the blast furnaces. The #2 Open Hearth shop and four furnaces were installed during 1916-1917, considerably increasing the plant's ability to produce basic steel. These new machines were constructed according to the most up-to-date designs and were run by electric power. From the 1920s, innovation in transport, automobiles, and household appliances created a demand in the production of a mass steel cold-rolled and wide sheet. The company benefited from these inventions by supplying products as steel bar and a great variety of fasteners to the automobile and to other industrial customers. Electric cranes, hydraulic machines and the use of blast furnace gas as fuel replaced men and horses. This move towards automation plus the development of its first safety program for workers cut serious industrial accidents by three-quarters during the 1920 decade. Stelco was able to survive to the great depression of 1929 in reasonable shape by diversifying its production, restraining new investment or reducing expansion of debt. The company took advantage of a period of re-adjustment to improve its equipment and methods of steel making. Stelco built its first modern metallurgical research laboratory in 1931, reported to be the finest in Canada. When business revived in 1936, Stelco was able to finance major modernization and expansion of its Open Hearth and rolling mills. In the same year, Local 1005 of the United Steelworkers of America has formed by the Steel Workers Organizing Committee. The new union asked to improve labor conditions, health, safety, and fewer working hours. Contribution to War Effort during Second World War: The production of munitions became of prime importance with the advent of World War II. With the company's experience gained during the Great War, Stelco managers decided that the contribution of the war effort be made by again going into the production of shell forgings. In 1940, Minister C.D. Howe decided that on Stelco property in Hamilton, a new company named The Ontario Forging Limited would be erected. This company would produce many kinds of munitions for Allied countries. All Stelco plants also contributed to this war effort. With the war demand, Stelco diversified its production and began an extensive program of expansion including the construction of a 110-inch plate mill for rolling steel plate for the use of Canadian corvettes. A hot strip mill was added to the plate mill in 1945 marking the beginning of a trend toward flat rolled products which grown rapidly in the coming years. The products manufactured were carbon steels, alloy steels demanded by R.C.A.F. and B.S.B, many types of stainless steel, steel plate, monel, aluminum alloys, copper and copper alloys. Stelco then was able to produce equipment for aircraft, carriers, tanks, automobiles, shells, guns, machine screws and a large number of special products. By war's end, Stelco produced 1,186,000 Net Tons of steel per year. After a period of very high production, tension began between workers and the company as was often seen at a turning point in the modern history of Canadian industrial relations. In 1946, a three-month strike in Hamilton interrupted its activities. Demanding higher wages, a 40-hour workweek and recognition of their union, about 2,000 employees laid siege at Hilton Works. Stelco Workforce and Selected Productive Output: In 1910, The Steel Company of Canada accounted for about 10 per cent of the country's steel ingot production. In that year, 5,100 employees worked in the several plants for about $11.73 wage per week. In 1917, the number of employees increased to 7,800 with an average of $22.74 of wage per week. By the end of the war, The Steel Company of Canada produced 377,724 Net Tons of steel processed, turned 1,312,616 shells of various kinds, 8,242,809 shrapnel and 19,805,824 component of shell parts. In 1930, 5,175 employees worked for the company with a salary of $29.90 per week. Stelco plants occupied approximately 425 acres of land and produced over 600 diversified steel products. 1,700 men went from Stelco to the armed forces and the number of employees in the mills increased from 7,534 to 9,000 during the war period. Among them, many women replaced men and were trained to the new requirements for high quality products produced. In 1953, the number of employees increased to 13,000 and Stelco processed 1,957,000 Net Tons of steel. In 1960, 14,600 employees worked at Stelco for an average of $116 per week. The company processed 2,687,000 Net Tons of steel in 1959. In 1965, the number of employees reached 20,262. The number of Stelco employees increased from 21,497 in 1970 to 23,192 in 1975 and decreased to a number of 19,519 in 1983. Unlike the 1930s, the recession of the early 1990, hit the company hard, and 1,100 job losses and drops in the share price persisted into 1990s. Accomplishments of the 1950s to 1970s: During the 1950s, Stelco placed emphasis on finishing its facilities to respond to the demand for flat rolled products especially for the automobile industry. The boom in this industry also created a demand in other areas of the transportation related field, such as the expansion of the Canadian highway system, including bridges and steel safety barriers. There was a tremendous increase in construction in Canada in the 1950s and 1960s. Stelco expanded its activity in the Province of Quebec by opening a new mill situated about 30 miles East of Montreal known locally as "The Gateway to the Seaway". Its name was McMaster Works in honor of R.H. McMaster, Stelco's Officer from 1910 to 1957. This new mill was designed as any in North America replaced the pipe-welding operation at St. Henry Works (Montreal). It featured the most modern method of producing pipe by the "continuous weld process", a new method of making pipes of various sizes used in plumbing, heating, oil and gas distribution lines, as conductors of water, and a wide variety of industrial uses. Modern office buildings built in larger cities in Canada required large open work areas, and steel provided the most efficient way of achieving that effect (e.g. The Toronto Dominion Centre). Stelco introduced several new products between 1950 and 1975. The patented Ardox nail was a Stelco invention in 1953 and is now produced by manufacturers in many countries. Another innovation introduced is the Stelcoloy weathering steel. It became the standard material for bridge construction. In 1961, the Hollow Structural Sections designed by Stelco were widely used for structural efficiency and aesthetic possibilities (e.g. Ontario Place in Toronto). Stelco structural bolts replaced rivets on a large scale in the 1950s reducing time-consuming in method of connecting steel structures in construction. Other major Stelco improvement in industry is the stabilized wire strand for pre stressed concrete and the Stelcolour coated sheets for the use of commercial and residential buildings. With the strong market in the 1970s, Stelco decided in 1974 to establish a new plant close to Lake Erie named Lake Erie Works (LEW). This modern steel plant equipped with the highest industrial technology ever undertaken in the Canadian steel industry, began its production during 1980s. Constructed in the purpose of meeting the growing demand for steel in Canada, it had an annual capacity of 1.7 million tons of semi-finished steel production. Labor Difficulties: 1960s and 1980-2000 In the 1960s, Stelco encountered serious labor difficulties. The company was dramatically expanding through the 1960s. Young workers were hired in masse, and then put into the worst, lowest seniority positions. Tensions were growing throughout 1966, a bargaining year. The usual pressure for a settlement was calculated or considered by fears surrounding technological change and automation in the industry. Low-seniority men, who would have the most to lose in automation-related job loss, felt this tension acutely. On the warm summer evening of 3 August 1966, negotiators met with the provincial Conciliation Board, a central instrument of postwar labor legislation designed to cool down tensions. Some 10,992 workers were on strike. Another similar strike occurred in 1969. In 1964, Stelco acquired Page-Hersey Tubes Limited located in Welland, Ontario to service the needs of the construction of oil and gas industry and to increase its pipe making activities. The company developed a new process called "Stelform" for producing 60-inches diameter by spiral weld method. This new product placed Stelco in a high position for supplying the industry especially for Artic conditions. Stelco then re-aligned its sale department. Sales staff were trained according to particular customers: automobile, heavy construction, all kind of supply services and distributors. Engineering and metallurgical departments were established to improve the work of Stelco engineers directly with architects in accordance with customer requirements. Stelco promoted its products by a wide range of publications and advertising: the "Trend" magazine gave architects and engineers a voice to explore new ideas in steel; "Scope", "Steel in Homes", "Steel in Transportation" and "Steel in Mining" were produced for Stelco customers. Stelco's experts published scientific articles and gave conferences in Canada and around the world. 1980s and 1990s proved to be difficult for the company. Stelco lost its position as Canada's largest steelmaker and employment declined considerably. The demand of steel decreased due to slow economic growth in Canada as well as a trend to substitute steel for other materials on a variety of purposes. By this time, there were signs that the challenge of competition from East Asia would force labor and management to collaborate in forging a new survival strategy. An 125 day-long strike occurred in 198, and another one occurred in 1990. Various mills closed in Quebec, Ontario and in Alberta. The company's long-term debt climbed dramatically. Revenues in 1990 were 24 percent less than the previous year, as the company posted a C$200 million loss. Recent Developments, 2000-current: In 2004, the Stelco entered bankruptcy protection, and in 2007, the United States Steel Corporation bought the company. Stelco became a subsidiary changing its name to U.S. Steel Canada. The Canadian subsidiary filed for bankruptcy protection in late 2014. In 2017, a transaction between U.S. Steel Canada and Bedrock Industries Group LLC has emerged from Companies' Creditors Arrangement Act (CCAA) protection and has formally changed its name to Stelco Inc. as it was formally in 1980 by Certificate of Continuance. Today, the number of employees is 2,000 workers located mainly in Hamilton area. Further Reading: For further details on the history of the company, please see the book entitled "Elements Combined" written by Dr. Kilbourn published by Clarke, Irwin & Co. (1960).
- Instrument de recherche :
Multiple media (Électronique) Finding aid consists of file level descriptions for volumes 1 to 810. MSS2699 (90: Ouvert)
http://data2.archives.ca/pdf/pdf001/p000001823.pdfAudiovisual material and sound recordings (Électronique) See item level in MISAC. (90: Ouvert)Textual (microfilm) (Électronique) This finding aid is a file list of microfilm reels M-9463 to M-9581. MSS2699 (90: Ouvert)
- Information additionnelle :
- Note générale :
- Container 783 does not exist.
- Lien à une ressource liée :
- Source :
Pour réserver ou acheter des documents
- Conditions d'accès :
Vous pouvez réserver des documents à l'avance pour qu'ils soient disponibles lors de votre visite. Vous aurez besoin d'une carte utilisateur pour ce faire.
Vous ne pouvez pas nous rendre visite ? Vous pouvez acheter une reproduction qui vous sera envoyée. Certaines restrictions peuvent s'appliquer.
- Date de modification :