Recherche dans la collection - Rankine Generating Station. Power house: turbines and governors, unit 11

Notice descriptive – Brève
1
Rankine Generating Station. Power house: turbines and governors, unit 11

Niveau hiérarchique :

Dossier

Date :

1916-1960

Référence :

R10004-56-5-E, Numéro de volume : 476--488, Numéro de dossier : 10 H 12.5

No dossier (créateur) :

10 H 12.5

No du BAN :

2009-00846-4

Genre de documents :

Dessins d'architecture et techniques

Trouvé dans :

Archives / Collections et fonds

No d'identification :

4698289

Contexte de cette notice :

Afficher les détails Masquer les détails

Canadian Niagara Power Company Limited

Engineering

[Technical and architectural drawings prepared or used by the Canadian Niagara Power Company]

Rankine Generating Station. Power house: turbines and governors, unit 11
Lien vers cette notice

Ajouter à Ma recherche

Lien vers cette notice

Le lien correspond à la page Web qui décrit ce document en particulier. Contrairement au lien temporaire de votre navigateur, celui-ci vous permettra à l’avenir d’accéder à cette page et de la citer comme référence. Pour établir un lien avec cette notice, copier-coller l’adresse URL à l’endroit désiré (dans un wiki, un blogue ou un document).

Ouvrir une session

Ouvrir une session pour commencer à sauvegarder des notices

Ouvrir une session
Notice descriptive – Détails

Date(s) :

1916-1960

Lieu de création :

Canada

Étendue :

134 technical drawings.

Langue du document :

anglais

Information additionnelle :

Afficher les détails Masquer les détails

Note sur la mention de responsabilité :

All items by Allis Chalmers Man. Co. except
items 1516-1524, 1531-1569: Canadian Niagara Power Company

Note sur le classement :

These drawings were transferred to LAC attached to a suspension bar bearing number "10 H 12.5" and titled "Power house : Turbines & Governors: Units 11".

Note structurée de contenu :

Afficher les détails Masquer les détails

1516. Drawing 10 H-12.5-5511. Unit 11 - Concrete draft tube sections 1923-10-01
1517. Drawing 10 H-12.5-5513. Unit 11 - Thrust deck floor framing plan 1924-01-10
1518. Drawing 10 H-12.5-5514. Unit 11 - General arrangement of machinery at guide decks 1923-06-19
1519. Drawing 10 H-12.5-5515. Unit 11 - General arrangement of machinery at thrust deck 1925-06-27
1520. Drawing 10 H-12.5-5516. Unit 11 - Thrust bearing details 1923-06-21
1521. Drawing 10 H-12.5-5517. Unit 11 - Thrust bearing details of bell sleeve and ball disc 1923-06-26
1522. Drawing 10 H-12.5-5518. Unit 11 - Thrust bearing details of casing 1927-06-29
1523. Drawing 10 H-12.5-5519. Unit 11 - Details of shafting 1923-06-16
1524. Drawing 10 H-12.5-5520. Unit 11 - Details of shaft coupling bearing bushing and brake wheel 1923-07-02
1525. Drawing 10 H-12.5. [Unit 11] - [Cross section of turbine] 1938-12-10
1526. Drawing 10 H-12.5. [Unit 11] - [Governor arrangement] 1923-12-06
1527. Drawing 10 H-12.5. [Unit 11] - 12,000 horse power turbine cross section [missing] 1923-12-11
1528. Drawing 10 H-12.5. [Unit 11] - 64" X 30.5" #15 Right hand runner. 1923-09-13
1529. Drawing 10 H-12.5. [Unit 11] - Piping [arrangement] and details used on hydraulic [turbine] 1923-12-21
1530. Drawing 10 H-12.5. [Unit 11] - Right hand Guide vane used on hydraulic turbine. 1923-08-04
1531. Drawing 10 H-12.5-5536. Unit 11 - Dam in wheel pit 1923-07-17
1532. Drawing 10 H-12.5-5572. Unit 11 - Plans at elevation 396.33 and 401.66 center of wheel case and turbine wheel 1923-07-08
1533. Drawing 10 H-12.5-5573. Unit 11 - Section thru unit on center line below turbine deck 1923-08-03
1534. Drawing 10 H-12.5-5574. Unit 11 - Plans at elevation 360.02 and 375, 385 and 390 in wheel pit 1923-08-10
1535. Drawing 10 H-12.5-5582. Unit 11 - General arrangement of unit at power house floor 1924-03-28
1536. Drawing 10 H-12.5-5602. Unit 11 - Concrete draft tube sections 1923-09-01
1537. Drawing 10 H-12.5-5604. Unit 11 - Concrete draft tube sections 1923-09-17
1538. Drawing 10 H-12.5-5699. Unit 11 - Turbine deck details 1923-11-14
1539. Drawing 10 H-12.5-5708. Unit 11 - Index sheet 1924-06-03
1540. Drawing 10 H-12.5-5749. Unit 11 - Thrust deck plan showing floor plates 1923-12-28
1541. Drawing 10 H-12.5-5756. Unit 11 - Brake deck floor framing plan 1924-01-16
1542. Drawing 10 H-12.5-5759. Unit 11 - Brake deck plan showing floor plates 1924-02-04
1543. Drawing 10 H-12.5-5828. Unit 11 - Upper and lower guide decks plan showing floor plates 1924-01-31
1544. Drawing 10 H-12.5-5864. Unit 11 - Drains below turbine deck 1924-01-15
1545. Drawing 10 H-12.5-5873. Unit 11 - Fly ball housing support 1924-01-25
1546. Drawing 10 H-12.5-5891. Unit 11 - Power house floor details of hatch and framing 1924-03-25
1547. Drawing 10 H-12.5-5920. Unit 11 - Steel details of thrust brake and upper and lower guide decks 1924-04-09
1548. Drawing 10 H-12.5-5937. Unit 11 - Framing plan and details of the intermediate decks 1924-04-16
1549. Drawing 10 H-12.5-5940. Unit 11 - Plan of piping on power house floor and thrust deck. 1924-04-22
1550. Drawing 10 H-12.5-5941. Unit 11 - Vertical sections thru power house floor and thrust deck showing piping 1924-04-22
1551. Drawing 10 H-12.5-5942. Unit 11 - Piping on east wall and at guide decks 1924-04-22
1552. Drawing 10 H-12.5-5949. Unit 11 - Break deck floor plates 1924-04-22
1553. Drawing 10 H-12.5-5951. Unit 11 - Lifting beam details 1924-04-24
1554. Drawing 10 H-12.5-5960. Unit 11 - Floor plates for upper and lower guide decks 1924-04-28
1555. Drawing 10 H-12.5-5961. Unit 11 - Oil and water system support for sump tank 1924-04-28
1556. Drawing 10 H-12.5-5964. Unit 11 - Intermediate decks unit # 6 and 7 detail of floor plate 1924-05-24
1557. Drawing 10 H-12.5-5976. Unit 11 - Details of intermediate floor plates 1924-05-07
1558. Drawing 10 H-12.5-5985. Unit 11 - Marking diagram and details of ladders 1924-05-26
1559. Drawing 10 H-12.5-5990. Unit 11 - Irving subway grating for hatch cover in power house floor 1924-05-19
1560. Drawing 10 H-12.5-6004. Unit 11 - Detail of guard for turbine shaft 1924-05-28
1561. Drawing 10 H-12.5-6249. Unit 11 - Cross section of 12,000 horse power turbine 1925-02-09
1562. Drawing 10 H-12.5-6270. Unit 11 - Gibbs thrust bearing retainer for rotor disc 1925-03-07
1563. Drawing 10 H-12.5-16013. [Unit 11] - Proposed adjustable lignum vitae bearing 1940-08-22
1564. Drawing 10 H-12.5-16308. Unit 11 - Adjustable lignum vitae bearing 1946-06-17
1565. Drawing 10 H-12.5. Unit 11 - Pitted area's on runner. 1939-12-11
1566. Drawing 10 H-12.5-16526. Sketch showing areas of cast steel runner to be welded with stainless steel 1940-04-22
1567. Drawing 10 H-12.5-16527. Stuffing boxes 1960-10-02
1568. Drawing 10 H-12.5-16530. Stuffing boxes 1960-10-02
1569. Drawing 10 H-12.5-18412. Adjustable Guide bearing for hydraulic turbine 1942-02-09
1570. Drawing 10 H-12.5-807139. Steel plating spiral casing used on hydraulic turbine 1923-09-21
1571. Drawing 10 H-12.5-807140. Section 8'6" inlet diameter spiral casing used on hydraulic turbine 1923-09-21
1572. Drawing 10 H-12.5-807147. Steel plate draft tube used on hydraulic turbine 1923-08-25
1573. Drawing 10 H-12.5-807158. Right hand runner used on hydraulic turbine 1923-09-15
1574. Drawing 10 H-12.5-807161. Right hand speed ring used on hydraulic turbine 1923-12-06
1575. Drawing 10 H-12.5-807164. Cover plate used on hydraulic turbine 1923-12-08
1576. Drawing 10 H-12.5-807165. Guide vane ring used on hydraulic turbine 1943-12-08
1577. Drawing 10 H-12.5-807166. Shifting ring used on hydraulic turbine 1923-09-21
1578. Drawing 10 H-12.5-807167. Lower elbow used on hydraulic turbine 1923-12-31
1579. Drawing 10 H-12.5-807168. Penstock used on hydraulic turbine 1923-11-28
1580. Drawing 10 H-12.5-807171. Concrete draft tube 1923-09-25
1581. Drawing 10 H-12.5-807172. Expansion joint with stuffing box for penstock 1923-09-25
1582. Drawing 10 H-12.5-807174. Steel plate upper penstock elbow on hydraulic turbine 1923-11-28
1583. Drawing 10 H-12.5-807176. 18" drain piping used on hydraulic turbine 1923-12-06
1584. Drawing 10 H-12.5-807183. Facing rings used on hydraulic turbine 1923-10-15
1585. Drawing 10 H-12.5-807186. Cover plate extension used on hydraulic turbine 1923-09-08
1586. Drawing 10 H-12.5-807187. Main shaft extension used on hydraulic turbine 1924-02-01
1587. Drawing 10 H-12.5-807190. Main shaft used on hydraulic turbine 1924-02-26
1588. Drawing 10 H-12.5-807195. Floor plates and platform used on hydraulic turbine 1923-12-06
1589. Drawing 10 H-12.5-808101. Guide bearing details used on hydraulic turbine 1923-12-07
1590. Drawing 10 H-12.5-808102. Guide bearing bracket used on hydraulic turbine 1928-12-07
1591. Drawing 10 H-12.5-808103. Details of thrust bearing used on hydraulic turbine 1923-12-07
1592. Drawing 10 H-12.5-808106. Details of girders for guide bearing decks used on hydraulic turbine 1923-12-01
1593. Drawing 10 H-12.5-808107. Details thrust bearing girder used on hydraulic turbine 1923-12-03
1594. Drawing 10 H-12.5-808110. Details of casing for thrust bearing used on hydraulic turbine 1923-12-31
1595. Drawing 10 H-12.5-808111. Thrust sleeves and ball disc for thrust bearing used on hydraulic turbine 1924-02-28
1596. Drawing 10 H-12.5-808113. "Bearing 19"" diameter used on hydraulic turbine" 1923-10-04
1597. Drawing 10 H-12.5-808119. Grease drain and filler piping for main bearing used on hydraulic turbine 1923-12-06
1598. Drawing 10 H-12.5-808125. Brake details used on hydraulic turbine 1923-12-07
1599. Drawing 10 H-12.5-808133. 18" regulating cylinder used on hydraulic turbine 1923-10-12
1600. Drawing 10 H-12.5-808134. Assembly of relay connections used on hydraulic turbine 1923-12-01
1601. Drawing 10 H-12.5-808135. Regulation diagram and regulator foundation 1923-10-11
1602. Drawing 10 H-12.5-808135. Regulation diagram and regulator foundation 1923-10-11
1603. Drawing 10 H-12.5-808136. Base plate used on hydraulic turbine 1923-10-12
1604. Drawing 10 H-12.5-808139. Details of brake used on hydraulic turbine 1923-11-02
1605. Drawing 10 H-12.5-808140. Stand and details for hand break used on hydraulic turbine 1923-11-02
1606. Drawing 10 H-12.5-808142. Hand brake details used on hydraulic turbine 1923-11-02
1607. Drawing 10 H-12.5-808150. Hand regulator connection for #3 Governor used on hydraulic turbine 1924-01-30
1608. Drawing 10 H-12.5-808165. Details for relay connections used on hydraulic turbine 1923-12-12
1609. Drawing 10 H-12.5-808176. Assembly 15" diameter guide bearing used for CNP 1923-12-03
1610. Drawing 10 H-12.5-808181. General arrangement of brake and hand operating stand 1923-11-28
1611. Drawing 10 H-12.5-808200. Foundation plan for supporting spiral casing used on hydraulic turbine 1923-12-07
1612. Drawing 10 H-12.5-809101. Assembly of hand operated brake used on hydraulic turbine 1923-11-28
1613. Drawing 10 H-12.5-809102. Assembly 15" diameter thrust bearing used on hydraulic turbine" 1923-11-28
1614. Drawing 10 H-12.5-809103]. Relay and piping arrangement used on hydraulic turbine 1923-12-21
1615. Drawing 10 H-12.5-809108. Cross section of turbine 1923-12-10
1616. Drawing 10 H-12.5-809190. Foundation used on hydraulic turbine 1924-03-03
1617. Drawing 10 H-12.5-810151. Piping arrangement for oil pump 1924-03-27
1618. Drawing 10 H-12.5-813249. 64" x 30.5" #15 right hand runner used on hydraulic turbine 1936-11-05
1619. Drawing 10 H-12.5-823221. 64" x 30.5" #15 right hand runner used on hydraulic turbine 1939-12-15
1620. Drawing 10 H-12.5-831409. 20" manhole saddle cover used on hydraulic turbine 1923-09-13
1621. Drawing 10 H-12.5-831412. Discharge ring used on hydraulic turbine 1923-09-17
1622. Drawing 10 H-12.5-831438. Coupling used on hydraulic turbine 1923-10-26
1623. Drawing 10 H-12.5-831454. Stuffing box and cover used on hydraulic turbine 1923-10-04
1624. Drawing 10 H-12.5-831458. Guide bearing used on hydraulic turbine 1923-12-07
1625. Drawing 10 H-12.5-831479. Cross head details used on hydraulic turbine 1923-11-07
1626. Drawing 10 H-12.5-831533. Pressure tank used on hydraulic turbine 1923-11-07
1627. Drawing 10 H-12.5-831543. 18" x 24" cover and saddle used on hydraulic turbine 1923-12-05
1628. Drawing 10 H-12.5-831551. Fly ball used on hydraulic turbine 1923-01-26
1629. Drawing 10 H-12.5-832341. Assembly rotary oil pump used on hydraulic turbine 1924-05-01
1630. Drawing 10 H-12.5-832417. Receiving tank used on hydraulic turbine 1924-04-08
1631. Drawing 10 H-12.5-833464. Guide vane levers used on hydraulic turbine 1925-01-14
1632. Drawing 10 H-12.5-836230. Wrench board used on hydraulic turbine 1916-01-15
1633. Drawing 10 H-12.5-848141. Cross head guide used on hydraulic turbine 1922-04-05
1634. Drawing 10 H-12.5-848146. Cross head guide used on hydraulic turbine 1922-04-05
1635. Drawing 10 H-12.5-851364. Shifting ring stop used on hydraulic turbine 1922-11-14
1636. Drawing 10 H-12.5-852437. Relay assembly for # 3 governor used on hydraulic turbine 1923-03-06
1637. Drawing 10 H-12.5-853356. Standard facing rings used on hydraulic turbine 1923-09-15
1638. Drawing 10 H-12.5-853378. 18" piston and piston ring 1923-10-12
1639. Drawing 10 H-12.5-853401. Foundation bolt and bracket for thrust bearing girder used on hydraulic turbine 1923-11-03
1640. Drawing 10 H-12.5-853526. Arrangement oil pump 1924-03-27
1641. Drawing 10 H-12.5-864400. Taper coupling bolts 1923-08-22
1642. Drawing 10 H-12.5-879837. Reinforcement of crown for 64" x 30.5" runner 1936-10-21
1643. Drawing 10 H-12.5-8791524. Proposed reconstruction of 19" diameter lignum vitae bearing 1940-05-03
1644. Drawing 10 H-12.5-8791525. Proposed reconstruction of 19" diameter lignum vitae bearing new housing and shoes 1940-05-03
1645. Drawing 10 H-12.5-82322?. 64" x 30.5" #15 right hand runner 1939-12-15
1646. Drawing 10 H-12.5-86438. Special pin 1925-11-16
1647. Drawing 10 H-12.5-86439. 4.25" piston rod 1922-04-12
1648. Drawing 10 H-12.5-86542. 4" connection rod 1924-10-10
1649. Drawing 10 H-12.5-87158. 64" x 30.5" #15 right hand runner used on hydraulic turbine 1923-12-10

Note sur les limites à la consultation :

There is no restriction on access to this material.

Source :

Privé
Pour réserver ou commander des documents

Conditions d'accès :

Afficher les détails Masquer les détails

Dessins techniques architecturaux

[Consultation90 Ouvert]

Volume [R10004] 476--488

[Consultation 90 Ouvert]

Modalités d'utilisation :

Afficher les détails Masquer les détails

Credit: Canadian Niagara Power Company / Library and Archives Canada

Vous pouvez réserver des documents à l'avance pour qu'ils soient disponibles lors de votre visite. Vous aurez besoin d'une carte utilisateur pour ce faire.

Vous ne pouvez pas nous rendre visite ? Vous pouvez acheter une reproduction qui vous sera envoyée. Certaines restrictions peuvent s'appliquer.

Signaler un problème sur cette page

Date de modification :: 2024-06-12