Collection search - Rankine Generating Station. Power house: turbines and governors, unit 11

Record information – Brief
1
Rankine Generating Station. Power house: turbines and governors, unit 11

Hierarchical level:

File

Date:

1916-1960

Reference:

R10004-56-5-E, Volume number: 476--488, File number: 10 H 12.5

File no. (creator):

10 H 12.5

BAN no.:

2009-00846-4

Type of material:

Architectural and technical drawings

Found in:

Archives / Collections and Fonds

Item ID number:

4698289

Context of this record:

Show detail Hide detail

Canadian Niagara Power Company Limited

Engineering

[Technical and architectural drawings prepared or used by the Canadian Niagara Power Company]

Rankine Generating Station. Power house: turbines and governors, unit 11
Link to this record

Add to My Research

Link to this record

This link identifies the web page describing this particular record. Unlike the temporary link in your browser, this link will allow you to access, and reference, this page in the future. To link to this descriptive record, copy and paste the URL where ever needed (wiki, blog, document).

Sign in

Sign in to start saving records using My Research

Sign in
Record information – Details

Date(s):

1916-1960

Place of creation:

Canada

Extent:

134 technical drawings.

Language of material:

English

Additional information:

Show detail Hide detail

Statement of responsibility note:

All items by Allis Chalmers Man. Co. except
items 1516-1524, 1531-1569: Canadian Niagara Power Company

Arrangement note:

These drawings were transferred to LAC attached to a suspension bar bearing number "10 H 12.5" and titled "Power house : Turbines & Governors: Units 11".

Formatted contents note:

Show detail Hide detail

1516. Drawing 10 H-12.5-5511. Unit 11 - Concrete draft tube sections 1923-10-01
1517. Drawing 10 H-12.5-5513. Unit 11 - Thrust deck floor framing plan 1924-01-10
1518. Drawing 10 H-12.5-5514. Unit 11 - General arrangement of machinery at guide decks 1923-06-19
1519. Drawing 10 H-12.5-5515. Unit 11 - General arrangement of machinery at thrust deck 1925-06-27
1520. Drawing 10 H-12.5-5516. Unit 11 - Thrust bearing details 1923-06-21
1521. Drawing 10 H-12.5-5517. Unit 11 - Thrust bearing details of bell sleeve and ball disc 1923-06-26
1522. Drawing 10 H-12.5-5518. Unit 11 - Thrust bearing details of casing 1927-06-29
1523. Drawing 10 H-12.5-5519. Unit 11 - Details of shafting 1923-06-16
1524. Drawing 10 H-12.5-5520. Unit 11 - Details of shaft coupling bearing bushing and brake wheel 1923-07-02
1525. Drawing 10 H-12.5. [Unit 11] - [Cross section of turbine] 1938-12-10
1526. Drawing 10 H-12.5. [Unit 11] - [Governor arrangement] 1923-12-06
1527. Drawing 10 H-12.5. [Unit 11] - 12,000 horse power turbine cross section [missing] 1923-12-11
1528. Drawing 10 H-12.5. [Unit 11] - 64" X 30.5" #15 Right hand runner. 1923-09-13
1529. Drawing 10 H-12.5. [Unit 11] - Piping [arrangement] and details used on hydraulic [turbine] 1923-12-21
1530. Drawing 10 H-12.5. [Unit 11] - Right hand Guide vane used on hydraulic turbine. 1923-08-04
1531. Drawing 10 H-12.5-5536. Unit 11 - Dam in wheel pit 1923-07-17
1532. Drawing 10 H-12.5-5572. Unit 11 - Plans at elevation 396.33 and 401.66 center of wheel case and turbine wheel 1923-07-08
1533. Drawing 10 H-12.5-5573. Unit 11 - Section thru unit on center line below turbine deck 1923-08-03
1534. Drawing 10 H-12.5-5574. Unit 11 - Plans at elevation 360.02 and 375, 385 and 390 in wheel pit 1923-08-10
1535. Drawing 10 H-12.5-5582. Unit 11 - General arrangement of unit at power house floor 1924-03-28
1536. Drawing 10 H-12.5-5602. Unit 11 - Concrete draft tube sections 1923-09-01
1537. Drawing 10 H-12.5-5604. Unit 11 - Concrete draft tube sections 1923-09-17
1538. Drawing 10 H-12.5-5699. Unit 11 - Turbine deck details 1923-11-14
1539. Drawing 10 H-12.5-5708. Unit 11 - Index sheet 1924-06-03
1540. Drawing 10 H-12.5-5749. Unit 11 - Thrust deck plan showing floor plates 1923-12-28
1541. Drawing 10 H-12.5-5756. Unit 11 - Brake deck floor framing plan 1924-01-16
1542. Drawing 10 H-12.5-5759. Unit 11 - Brake deck plan showing floor plates 1924-02-04
1543. Drawing 10 H-12.5-5828. Unit 11 - Upper and lower guide decks plan showing floor plates 1924-01-31
1544. Drawing 10 H-12.5-5864. Unit 11 - Drains below turbine deck 1924-01-15
1545. Drawing 10 H-12.5-5873. Unit 11 - Fly ball housing support 1924-01-25
1546. Drawing 10 H-12.5-5891. Unit 11 - Power house floor details of hatch and framing 1924-03-25
1547. Drawing 10 H-12.5-5920. Unit 11 - Steel details of thrust brake and upper and lower guide decks 1924-04-09
1548. Drawing 10 H-12.5-5937. Unit 11 - Framing plan and details of the intermediate decks 1924-04-16
1549. Drawing 10 H-12.5-5940. Unit 11 - Plan of piping on power house floor and thrust deck. 1924-04-22
1550. Drawing 10 H-12.5-5941. Unit 11 - Vertical sections thru power house floor and thrust deck showing piping 1924-04-22
1551. Drawing 10 H-12.5-5942. Unit 11 - Piping on east wall and at guide decks 1924-04-22
1552. Drawing 10 H-12.5-5949. Unit 11 - Break deck floor plates 1924-04-22
1553. Drawing 10 H-12.5-5951. Unit 11 - Lifting beam details 1924-04-24
1554. Drawing 10 H-12.5-5960. Unit 11 - Floor plates for upper and lower guide decks 1924-04-28
1555. Drawing 10 H-12.5-5961. Unit 11 - Oil and water system support for sump tank 1924-04-28
1556. Drawing 10 H-12.5-5964. Unit 11 - Intermediate decks unit # 6 and 7 detail of floor plate 1924-05-24
1557. Drawing 10 H-12.5-5976. Unit 11 - Details of intermediate floor plates 1924-05-07
1558. Drawing 10 H-12.5-5985. Unit 11 - Marking diagram and details of ladders 1924-05-26
1559. Drawing 10 H-12.5-5990. Unit 11 - Irving subway grating for hatch cover in power house floor 1924-05-19
1560. Drawing 10 H-12.5-6004. Unit 11 - Detail of guard for turbine shaft 1924-05-28
1561. Drawing 10 H-12.5-6249. Unit 11 - Cross section of 12,000 horse power turbine 1925-02-09
1562. Drawing 10 H-12.5-6270. Unit 11 - Gibbs thrust bearing retainer for rotor disc 1925-03-07
1563. Drawing 10 H-12.5-16013. [Unit 11] - Proposed adjustable lignum vitae bearing 1940-08-22
1564. Drawing 10 H-12.5-16308. Unit 11 - Adjustable lignum vitae bearing 1946-06-17
1565. Drawing 10 H-12.5. Unit 11 - Pitted area's on runner. 1939-12-11
1566. Drawing 10 H-12.5-16526. Sketch showing areas of cast steel runner to be welded with stainless steel 1940-04-22
1567. Drawing 10 H-12.5-16527. Stuffing boxes 1960-10-02
1568. Drawing 10 H-12.5-16530. Stuffing boxes 1960-10-02
1569. Drawing 10 H-12.5-18412. Adjustable Guide bearing for hydraulic turbine 1942-02-09
1570. Drawing 10 H-12.5-807139. Steel plating spiral casing used on hydraulic turbine 1923-09-21
1571. Drawing 10 H-12.5-807140. Section 8'6" inlet diameter spiral casing used on hydraulic turbine 1923-09-21
1572. Drawing 10 H-12.5-807147. Steel plate draft tube used on hydraulic turbine 1923-08-25
1573. Drawing 10 H-12.5-807158. Right hand runner used on hydraulic turbine 1923-09-15
1574. Drawing 10 H-12.5-807161. Right hand speed ring used on hydraulic turbine 1923-12-06
1575. Drawing 10 H-12.5-807164. Cover plate used on hydraulic turbine 1923-12-08
1576. Drawing 10 H-12.5-807165. Guide vane ring used on hydraulic turbine 1943-12-08
1577. Drawing 10 H-12.5-807166. Shifting ring used on hydraulic turbine 1923-09-21
1578. Drawing 10 H-12.5-807167. Lower elbow used on hydraulic turbine 1923-12-31
1579. Drawing 10 H-12.5-807168. Penstock used on hydraulic turbine 1923-11-28
1580. Drawing 10 H-12.5-807171. Concrete draft tube 1923-09-25
1581. Drawing 10 H-12.5-807172. Expansion joint with stuffing box for penstock 1923-09-25
1582. Drawing 10 H-12.5-807174. Steel plate upper penstock elbow on hydraulic turbine 1923-11-28
1583. Drawing 10 H-12.5-807176. 18" drain piping used on hydraulic turbine 1923-12-06
1584. Drawing 10 H-12.5-807183. Facing rings used on hydraulic turbine 1923-10-15
1585. Drawing 10 H-12.5-807186. Cover plate extension used on hydraulic turbine 1923-09-08
1586. Drawing 10 H-12.5-807187. Main shaft extension used on hydraulic turbine 1924-02-01
1587. Drawing 10 H-12.5-807190. Main shaft used on hydraulic turbine 1924-02-26
1588. Drawing 10 H-12.5-807195. Floor plates and platform used on hydraulic turbine 1923-12-06
1589. Drawing 10 H-12.5-808101. Guide bearing details used on hydraulic turbine 1923-12-07
1590. Drawing 10 H-12.5-808102. Guide bearing bracket used on hydraulic turbine 1928-12-07
1591. Drawing 10 H-12.5-808103. Details of thrust bearing used on hydraulic turbine 1923-12-07
1592. Drawing 10 H-12.5-808106. Details of girders for guide bearing decks used on hydraulic turbine 1923-12-01
1593. Drawing 10 H-12.5-808107. Details thrust bearing girder used on hydraulic turbine 1923-12-03
1594. Drawing 10 H-12.5-808110. Details of casing for thrust bearing used on hydraulic turbine 1923-12-31
1595. Drawing 10 H-12.5-808111. Thrust sleeves and ball disc for thrust bearing used on hydraulic turbine 1924-02-28
1596. Drawing 10 H-12.5-808113. "Bearing 19"" diameter used on hydraulic turbine" 1923-10-04
1597. Drawing 10 H-12.5-808119. Grease drain and filler piping for main bearing used on hydraulic turbine 1923-12-06
1598. Drawing 10 H-12.5-808125. Brake details used on hydraulic turbine 1923-12-07
1599. Drawing 10 H-12.5-808133. 18" regulating cylinder used on hydraulic turbine 1923-10-12
1600. Drawing 10 H-12.5-808134. Assembly of relay connections used on hydraulic turbine 1923-12-01
1601. Drawing 10 H-12.5-808135. Regulation diagram and regulator foundation 1923-10-11
1602. Drawing 10 H-12.5-808135. Regulation diagram and regulator foundation 1923-10-11
1603. Drawing 10 H-12.5-808136. Base plate used on hydraulic turbine 1923-10-12
1604. Drawing 10 H-12.5-808139. Details of brake used on hydraulic turbine 1923-11-02
1605. Drawing 10 H-12.5-808140. Stand and details for hand break used on hydraulic turbine 1923-11-02
1606. Drawing 10 H-12.5-808142. Hand brake details used on hydraulic turbine 1923-11-02
1607. Drawing 10 H-12.5-808150. Hand regulator connection for #3 Governor used on hydraulic turbine 1924-01-30
1608. Drawing 10 H-12.5-808165. Details for relay connections used on hydraulic turbine 1923-12-12
1609. Drawing 10 H-12.5-808176. Assembly 15" diameter guide bearing used for CNP 1923-12-03
1610. Drawing 10 H-12.5-808181. General arrangement of brake and hand operating stand 1923-11-28
1611. Drawing 10 H-12.5-808200. Foundation plan for supporting spiral casing used on hydraulic turbine 1923-12-07
1612. Drawing 10 H-12.5-809101. Assembly of hand operated brake used on hydraulic turbine 1923-11-28
1613. Drawing 10 H-12.5-809102. Assembly 15" diameter thrust bearing used on hydraulic turbine" 1923-11-28
1614. Drawing 10 H-12.5-809103]. Relay and piping arrangement used on hydraulic turbine 1923-12-21
1615. Drawing 10 H-12.5-809108. Cross section of turbine 1923-12-10
1616. Drawing 10 H-12.5-809190. Foundation used on hydraulic turbine 1924-03-03
1617. Drawing 10 H-12.5-810151. Piping arrangement for oil pump 1924-03-27
1618. Drawing 10 H-12.5-813249. 64" x 30.5" #15 right hand runner used on hydraulic turbine 1936-11-05
1619. Drawing 10 H-12.5-823221. 64" x 30.5" #15 right hand runner used on hydraulic turbine 1939-12-15
1620. Drawing 10 H-12.5-831409. 20" manhole saddle cover used on hydraulic turbine 1923-09-13
1621. Drawing 10 H-12.5-831412. Discharge ring used on hydraulic turbine 1923-09-17
1622. Drawing 10 H-12.5-831438. Coupling used on hydraulic turbine 1923-10-26
1623. Drawing 10 H-12.5-831454. Stuffing box and cover used on hydraulic turbine 1923-10-04
1624. Drawing 10 H-12.5-831458. Guide bearing used on hydraulic turbine 1923-12-07
1625. Drawing 10 H-12.5-831479. Cross head details used on hydraulic turbine 1923-11-07
1626. Drawing 10 H-12.5-831533. Pressure tank used on hydraulic turbine 1923-11-07
1627. Drawing 10 H-12.5-831543. 18" x 24" cover and saddle used on hydraulic turbine 1923-12-05
1628. Drawing 10 H-12.5-831551. Fly ball used on hydraulic turbine 1923-01-26
1629. Drawing 10 H-12.5-832341. Assembly rotary oil pump used on hydraulic turbine 1924-05-01
1630. Drawing 10 H-12.5-832417. Receiving tank used on hydraulic turbine 1924-04-08
1631. Drawing 10 H-12.5-833464. Guide vane levers used on hydraulic turbine 1925-01-14
1632. Drawing 10 H-12.5-836230. Wrench board used on hydraulic turbine 1916-01-15
1633. Drawing 10 H-12.5-848141. Cross head guide used on hydraulic turbine 1922-04-05
1634. Drawing 10 H-12.5-848146. Cross head guide used on hydraulic turbine 1922-04-05
1635. Drawing 10 H-12.5-851364. Shifting ring stop used on hydraulic turbine 1922-11-14
1636. Drawing 10 H-12.5-852437. Relay assembly for # 3 governor used on hydraulic turbine 1923-03-06
1637. Drawing 10 H-12.5-853356. Standard facing rings used on hydraulic turbine 1923-09-15
1638. Drawing 10 H-12.5-853378. 18" piston and piston ring 1923-10-12
1639. Drawing 10 H-12.5-853401. Foundation bolt and bracket for thrust bearing girder used on hydraulic turbine 1923-11-03
1640. Drawing 10 H-12.5-853526. Arrangement oil pump 1924-03-27
1641. Drawing 10 H-12.5-864400. Taper coupling bolts 1923-08-22
1642. Drawing 10 H-12.5-879837. Reinforcement of crown for 64" x 30.5" runner 1936-10-21
1643. Drawing 10 H-12.5-8791524. Proposed reconstruction of 19" diameter lignum vitae bearing 1940-05-03
1644. Drawing 10 H-12.5-8791525. Proposed reconstruction of 19" diameter lignum vitae bearing new housing and shoes 1940-05-03
1645. Drawing 10 H-12.5-82322?. 64" x 30.5" #15 right hand runner 1939-12-15
1646. Drawing 10 H-12.5-86438. Special pin 1925-11-16
1647. Drawing 10 H-12.5-86439. 4.25" piston rod 1922-04-12
1648. Drawing 10 H-12.5-86542. 4" connection rod 1924-10-10
1649. Drawing 10 H-12.5-87158. 64" x 30.5" #15 right hand runner used on hydraulic turbine 1923-12-10

Restrictions on access note:

There is no restriction on access to this material.

Source:

Private
Ordering and viewing options

Conditions of access:

Show detail Hide detail

Architectural: technical drawings

[Consultation90 Open]

Volume [R10004] 476--488

[Consultation 90 Open]

Terms of use:

Show detail Hide detail

Credit: Canadian Niagara Power Company / Library and Archives Canada

You can order materials in advance to be ready for you when you visit. You will need a user card to do this.

Cannot visit us on site? You can purchase a copy to be sent to you. Some restrictions may apply.

Report a problem on this page

Date modified:: 2024-07-24